WATER TREATMENT PLANT (WTP/RO/DM)


DM PLANTS We are one of the prominent manufacturers of premium-quality DM Plant. DM plant consists of cation and anion beds. Raw water is passed through the cation bed, which converts all ionized salts to the equivalent mineral acids. The anion bed then absorbs these acids to finally give de mineralized and deionized water. When resins are exhausted, the cation resins are re-generated with Hydrochloric acid and the anion resins are regenerated using caustic soda. We supply DM plants to clients at affordable prices. Features: • Easy to install • Easy to maintain • Affordable DM plant consists of two Beds (Cation & Anion) Water Quality (Conductivity) from Two Bed Outlet will be between 15 to 20 micro siemens. First raw water is passed through the cation resins column (H+ form), which converts all ionized salts to the equivalent mineral acids. Then Anion Resins Column (OH form), which absorbs these acids and finally gives De mineralized (Deionized) water. When resins are exhausted - the cations Resins are regenerated with Hydrochloric acid (Hcl) and the Anion resins are regenerated by caustic Soda (NaOH) solution. So the same resins can be used over and over again to produce the DM water.

EVERGREEN ENVIRONMENTAL SOLUTION PVT. LTD. desalination unit uses the reverse osmosis process to remove dissolved solids from brackish or saline water. The process is continuous and requires no regeneration chemicals. The unit is factory tested and easy to install and operate. Treated water quality is continuously monitored by a Total dissolved Salt indicator. Reverse Osmosis System: Exploding population, industrial effluents, and reckless deforestation have depleted natural sources of pure water. Dependence on erratic monsoons to replenish these sources has proved extremely inadequate & expensive. Good management of existing water resources and untapped sources, along with recovery and recycling of Industrial effluents & municipal waste water, seem absolutely essential for the future of mankind. Principle of Reverse Osmosis: Reverse Osmosis system uses semi-permeable spiral wound membrane to separate and remove dissolved solids, organics, pyrogens, submicron colloidal matter and bacteria from water. Feed water is delivered under high pressure through permeators, where water permeates through the minute pores of the membrane and is delivered as purified product water. Removal of Impurities: Impurities in the water are concentrated in the reject stream and flushed to drain. Output Range: The system is available in a wide range of models for treating water quality of varying Total Dissolved Solids (TDS) with different flow rates Purity Standards Maintained: Maximum purity is attained by reducing 95% - 99% of the TDS Advantages: Hygienic drinking water for domestic use. Reduces the cost of deionized water for boiler-feed and process. Ultra pure water for Electronic Industries To meet specific requirements in process industries Cooling Tower blow down water recovery. To remove fluorides from water, thus controlling fluorosis (a crippling disease). Conversion of brackish/sea water into potable water. Useful for Industries such as Food, Beverages, Pharmaceutical, Micro-Electronic, Aquaculture, Hospitals, Hotels, Mineral Water etc